WELCOME!


It is hard to believe that it was almost ten years ago I witnessed a CNC router in action for the very first time. I was fascinated with what I saw and simply had to have one! Although I had been in the creative end of the three dimensional sign business for most of my life I didn't really know what I would do with one - but I just knew it could do fantastic stuff.

Through extensive research and LOTS of hands-on practice I quickly found out that my MultiCam router was capable of just about anything imaginable.This journal will chronicle that journey to date and continue each week with two or three entries as I continue to explore just what is possible with this wonderful tool... -dan

Friday, September 28, 2012

First Assembly

It's been a while since I had any time to work on the Lucky Jim sign but tonight I squeezed in about half an hour to do a few things. I cut a few pieces on the band saw including the two axles and the frame.  I also cut some axles from 1/4" steel pencil rod and then drilled the holes (slightly off kilter) for the wheels.

The pieces were assembled using five minute epoxy making them plenty strong in a very big hurry. I'll be adding more details with sculpting epoxy the next time I get some time.


I'll be mocking up the box on the mine car next along with Lucky Jim. At that point I can determine the size the sign needs to be and I'll get to sizing the routing files which I've already begun.

Stay tuned for more developments...

-dan