WELCOME!


It is hard to believe that it was almost ten years ago I witnessed a CNC router in action for the very first time. I was fascinated with what I saw and simply had to have one! Although I had been in the creative end of the three dimensional sign business for most of my life I didn't really know what I would do with one - but I just knew it could do fantastic stuff.

Through extensive research and LOTS of hands-on practice I quickly found out that my MultiCam router was capable of just about anything imaginable.This journal will chronicle that journey to date and continue each week with two or three entries as I continue to explore just what is possible with this wonderful tool... -dan

Wednesday, September 11, 2013

Guy's name plaque

For Guy's name plaque I decided a log round would be cool. I started with a domed round relief then imported the bitmap (from the TEXTURE MAGIC COLLECTION)



I created the first vector and relief round because the bitmap was that shape, but I squished it a bit to make it an oval. I then created a 1/2" tall flat relief using the lettering outline.


Then using the oval vector (offset from the primary relief) I modified the lettering outline relief using the dome tool.


Then I modified the oval base relief  using the lettering vectors. This effectively pushed the letters (with the wood grain) up through the smooth lettering outline.



The last step was to merge (highest) the two reliefs.


As always the file was now ready for tool pathing and then to be sent to the MultiCam to be routed from 1.5" 30 lb Precision Board.


It will look even better with paint and glazes. Stay tuned...

-dan